How to Print Calligraphy Place Cards for a Wedding
To print calligraphy place cards for a wedding, export each guest’s name as a transparent PNG, place it on the lower half of a tent card, and print at 100%. Try the Amelia Rose sample on plain paper first. A ruler will tell you whether the card and the lettering are coming out at the intended size.

Choose the card size before you set the type
For flat calligraphy place cards that slip into holders, start with a 3.5 × 2 inch rectangle (about 89 × 51 mm). Check the opening of your holder first. For a tent card that stands on its own, use a 3.5 × 4 inch blank. A horizontal fold halfway down gives you two 3.5 × 2 inch panels. With the blank upright on screen, leave the top half empty and put the name in the bottom half, reading normally. After folding, the name will face out with the crease above it.
In your layout app, choose the sheet you will actually feed into the printer. US Letter is 8.5 × 11 inches. A4 is 210 × 297 mm. On either sheet in portrait orientation, four of these unfolded tent cards fit in two rows of two. Leave space between the outlines for cutting and keep all four inside your printer’s printable area. If you bought perforated or pre-scored stock, start with the manufacturer’s template so the folds and cuts land in the right places.
Export one guest’s name
Open the Calligraphy Generator and replace the sample with the guest’s name, including accents and hyphens. For the sample card on this page, choose Formal and Pine, type Amelia Rose, then choose Download PNG in the generator. The file is a 2000 × 800 pixel image with a transparent background. The lettering keeps its ink color and shape when you place it in a different app.
Try your longest guest name before laying out the whole sheet. A short name and a double surname can look like two different type sizes if you stretch each to fill the same width. Compare their capital letters side by side. Let a short name take up less space and give a long name a second line if it needs one.
Crop the transparent margins and set the width
In Canva, open Uploads, choose Upload files, and select the PNG. In Word, use Insert → Pictures. Place the image on the lower panel and use the image crop handles to bring each edge close to the outermost ink. Zoom in on capital flourishes, accent marks and the tails of letters such as g and y. Keep those strokes inside the crop and lock the image proportions before resizing.
Here is the size calculation for this particular name. The Amelia Rose PNG has 160 transparent pixels at each side and 234 above and below. Its visible lettering occupies 1680 × 332 pixels. If you trim exactly to that ink and set the width to 2.5 inches (63.5 mm), the name will be about 0.49 inches tall, with 672 pixels per printed inch. Centered on a 3.5 inch panel, that leaves half an inch on either side.
You can also keep the full PNG and set its width to 2.98 inches. That gives the same 2.5 inch span of ink. Setting the untrimmed image itself to 2.5 inches makes the visible name only 2.1 inches wide. Other names have different margins. Use the size fields and crop preview for the name you are placing.
Print one sheet and check it with a ruler
Use Print the sample card at the top of this page for a one-card test on plain paper. Choose the paper size loaded in the tray, select Actual size or 100%, and turn off browser headers and footers. The printed sheet includes a one-inch line under the card. Measure that line first, then measure the solid outline. It should be 3.5 inches wide and 4 inches tall.
For your own design, use Canva’s PDF Print download or save the Word page as a PDF. Open the PDF and print one sheet at actual size. If the outline measures short, check the print dialog for “Fit to page” or “Shrink oversized pages.” If the outline is right but the name looks small, revisit the PNG crop. These two checks tell you which setting to change.
Cut, fold and proof the guest list
Cut around the outside of the blank. Score the horizontal center line with a ruler and a blunt creasing tool, then fold so the printed lower panel faces out. Stand it on the table. Read the name from a seated guest’s distance and check the fine strokes under the room lighting. For flat cards, slip the proof into the actual holder and make sure the lip leaves the name visible.
Before printing the full set of calligraphy place cards, repeat the test on one sheet of your chosen stock. Use a paper type and weight your printer supports. Once that sheet passes, duplicate the layout, replace each name PNG, and compare the sheet with the guest list before printing the rest.
More from the studio
Create the next guest’s name in the Calligraphy Generator. For a name you can paste into a profile, see how to put calligraphy in your Instagram bio.
Printing questions
Can I print a flat place card with the same name image?
Yes. Set a single panel to the finished size you need, center the cropped PNG on it and leave clearance for the holder. A flat card has no second panel to fold.
Why does my place card print with a white box around the name?
Place the PNG over a colored shape in your layout. The shape should show around and between the strokes. If a white rectangle remains, check for a background shape or replace the image with the original transparent PNG from Download PNG.
How do I check accents and fine strokes before I print every name?
To proof your calligraphy place cards, put an accented name, your longest surname and a short name on the same sheet. Print them at the final size on your chosen stock. Check the accents against the guest list and look for thin strokes that disappear into the paper texture.